Disposable Filter Cartridges

Size : 10”, 20”, 30”, 40” Long

MOC : Polypropylene /PTFE/Poly ether Sulphonyl /PVDF / Nylon

Micron Rating : 0.1,0.2,0.45,1,5,10,20 Micron Absolute

Gasket : Silicon, EPDM, Viton, Buna-N

End Connection : Both End Open, Code VII, Code II

Coating : Zinc coated /Hard chromed

Max. Operating Temperature : 90° C

Maximum Differential Pressure : 75 psi

Flow Direction : Outside to in

Gaskets : Buna-N—other materials available on request

Filter Media : Polypropylene, Polystyrene, HDPE, PTFE)

Core : Perforation or Spring

End Cap : Polypropylene, SS or Aluminum

Gasket/O-ring : 2μm, 5μm, 10μm, 25μm, 50μm, 75μm, 125μm and 150μm

Type of caps : Both End Open, Threaded Adaptors

Type of Construction : Coreless, one-piece, rigid resin bonded fibrous matrix

Micron : 2μm, 5μm, 10μm, 25μm, 50μm, 75μm, 125μm and 150μm

Size : Outside Diameter: 2-9⁄16 in (65) & Inside Diameter: 1-1⁄8 in (28.6)

Lengths : Nominal, 10, 20, 30 and 40 in

Materials of Construction : Resin

Materials of Construction : Polypropylene, PTFE, PES, Nylon

Membrane : Membrane Support Polypropylene Microfiber

Housing : Cage, Core, End Caps: Polypropylene

Fitting Connections : MNPT, FNTP, Compression, Flare, Sanitary Flange, Hose Barb

Diameter : 3.5 “(9 cm)

Filter Media : Glass Fibre, Bleached cotton, Polyester, Polypropylene

Size : 64 mm OD, 100 mm OD, 115 mm OD available in 10” 20” 30” & 40 “lengths

Micron Rating : 01, 05, 010, 025, 050, 075, 100, 150 & Customize….

Core : Polypropylene, SS 304, SS 316, Coreless

End Connection : Both End Open, CODEVII with O-ring Adaptor