Cartridge Filter Systems

The HEPA Seal Bag In/Bag Out housings are designed to protect facility personnel and the general public from Toxic & Hazardous materials. The filters that have to replace contains the Contaminants.

The bagging method of changing a filter is not foolproof;BIBO is the safest practical method available for changing contaminated filter.

The Bag In/Bag Out system having side access to air filter housing to hold gasket seal filters. It is an all-welded equipment designed for critical clean air applications.

Features & Benefits

• Modularity and Flexibility


• High security guarantee


• High operator protection by BIBO


• Fully Welded

Application

This Bag In/Bag Outside access filter housing is designed for and useful forthe following applications:

• Radiological Contamination


• Pharmaceutical and Biotechnological Clean Rooms


• Medical Device Clean Rooms


• Microelectronics


• Nanotechnology


• Hospital Suites


• Isolation Areas

Single Cartridge Filter Housings are fabricated from SS304, SS316 and SS316L etc. varied material of construction. Housings are suitable to accommodate customised connection filter cartridges i.e. Both End Open Type, BSP/NPT threaded type and Code-VII adaptor type. Such housings are closed using TC clamp Closure or Eye Bolt Closure depending upon design pressure.

Multi-cartridge housings are different than single housings. They hold more than one cartridge at the same time in the same chamber, allowing for higher flow rates and higher filter surface area. Multi cartridge filter housings are designed as per ASME SEC VII DIV-1 code as per pressure vessel calculations. We carry ASME code stamped and non-code stamped models as well as other special options to suit your filtration application.

Features & Benefits

• Single Cartridge filter housing is Compact designed.


• Single round Housing Requires minimum floor space and can be dismantled quickly cleaning or replacement of Cartridges.


• Sanitary design filter housings are available with quick opening tri-clover clamps or ASA flanged nozzles.


• Drain, sampling, and vent connections are provided.


• T-style and inline configurations allow flexible piping options.


• Filter housings are suitable for filter cartridges of length 5”, 10”, 20”, 30” etc.


• Electro polished surface is provided on request.


• Multi Cartridge filter housings are suitable to installed a large nos. of filter cartridges for high flow capacities.


• Filter housing can be fully drained provided with swing bolts for quick opening & davit arm with wheel for ease of Lifting top covers.


• Externally mechanically polished, buffed or pickled.


• Various instrument configurations possible.


• Multi cartridge filter housings are suitable for cartridges with end-cap configuration of Both End Open, BSP/NPT threaded end, CODE-VII and customised

Standard Specifications

• Design pressure : Full Vacuum to 250 bar Max.


• Design temperature : -10 Deg C to 300 Deg C & for Gas Temp. Upto 1000 Deg C


• All parts with fluid contact are SS 304, SS 316L, Hastelloy, Monel, Duplex Steel, Alloy 20 etc.


• Housings are available with Eye Bolt & Swing Nut Closure, Lifting Lugs, Holding LUG or Support legs.


• Internally & Externally polished Upto Ra < 0.8μm, On-request internally can be polished upto Ra < 0.4μm and/or electro polishing also possible.


• O-ring sealing: standard Silicon, Viton, PTFE, EPDM.

Customized Specifications

We understand that our customers are facing complex processes and environmental requirements. There where standard filter housing could not be sufficient, our engineers are able to design a custom made filtration solution.

If you are looking for the best Duplex filter system manufacturer in Gujarat, you are in the right place. Our company TFI Filtration UK Ltd is one of the best in the country today. We are trusted and reliable and we manufacture our products in our infrastructure under the supervision of our customers and clients.

The Duplex basket strainers of our company are built for continuous flow applications where cleaning shutdowns are not permitted. The duplex filter assembly allows the flow to be switched back and forth between two filter vessels, allowing one side to be serviced while the other is in use. Duplex strainers protect mechanical equipment by straining foreign matter from the connected piping system, reducing overall operating costs.

Our Duplex Strainers and Bag Filters provide a better solution for your trouble free, continuous operation project needs. We are the best Duplex filter system Exporter and our products have amazing benefits. Some are as follows.

Duplex Basket Strainer Advantages

The duplex strainer of our company is a better solution, and offers many benefits:

• Four separate valves are used, all operated simultaneously by a single lever.

• Valves use the standard butterfly design, known for their effective seal, low pressure drop, and low cost.

• Any of the valves can be serviced individually, without the need to disturb the other valves or piping.

Contact us today and get our products delivered to your doorstep. We are the best Duplex filter system supplier in India.

Our unique Cartridge and bag filter housings with Polymeric coating of ETFE & PFA have been used by high-purity chemical suppliers in the sub-micron filtration of high purity chemicals where PP , HDPE or rubber lining is not compatible

Features & Benefits

• Carbon Steel or Stainless-Steel exterior with Inside Coating of 800 micron ± thickness.
• 1 round to 100 round designs.
• 10″, 20″, 30″, 40” long filter cartridges.
• 1 round to 7 round designs filter bags.
• 20″ or 30″ Long filter bags.
• Maximum pressure rating of 150 psig (10 bar).
• Unique filter plate design for maximum throughput.

Application

• Pharmaceuticals
• Aggressive Chemicals
• Corrosive fluids

Our unique, Cartridge& bag filter housings with Non-metallic lining have been used by high-purity chemical suppliers in the sub-micron filtration of high purity chemicals, including H2SO4 & H3PO4

Features & Benefits

• Carbon Steel or Stainless-Steel exterior.
• 1 round to 21 round designs.
• 10″, 20″, 30″ filter cartridges.
• 1 round to 7 round designs bags.
• 20″, 30″ Long bags.
• Maximum pressure rating of 150 psig (10 bar).
• Unique filter plate design for maximum throughput.

Application

• Pharmaceuticals
• Aggressive Chemicals
• Corrosive fluids

TFI Filtration UK Ltd is the best Self Cleaning Filter System Manufacturer based in Gujarat, India. Auto Cleaning filtration systems have a filter housing, a strainer element, a self-cleaning mechanism, supports and required accessories.

We are Self Cleaning Filter System exporter and export our products to customers all around the world. Auto Cleaning reaches various markets:

• Chemicals

• Ethanol

• Food and Beverage

• Manufacturing

• Oil and Gas

• Pulp and Paper

• Petrochemical

• Pharmaceuticals

• Water

There are two different types of Self Cleaning Filter Systems available in our company. Each one has a different benefit and fulfils all kinds of purposes of our customers and clients.

Disc type Auto Cleaning filter housing

It is used for highly viscous material filtration like Grease, Lube Oil, Edible Oil, Toothpaste & many more. Here, we don’t require any backwashing media to clean the Filter Element. It is working under the principle of differential pressure parameters for uninterrupted filtration requirements. Can be pneumatically or electrically operated as per their process requirement.

Scrapper type Auto Cleaning filter housing

Scrapper Mechanism Self Cleaning Filters are widely used for continuous filtration requirements without any replacement of Filter Consumables and Exposure of operators. Like an auto backwash filter, Scrapper Mechanism Self Cleaning is used for preliminary filtration following the same principle of differential pressure; the only difference is that it is used for applications where a backwashing medium is not available.

Order our products today and get them delivered to your doorstep. We are the best Self Cleaning Filter System Supplier In India.

The horizontal sparkler type filter is the most versatile filtration system for solid – liquid separation. Used with the help of filter aids for giving a sparkling effect to the liquids.

Sparkler filter is available in different output capacities with a variety of pumps to suit individual requirements.

Horizontal Plate Sparkler Filters is the most versatile filtration system for solid – liquid separation with high solid volumes.

Features & Benefits

• Single pass filtration with no solid bypass.


• Full batch recovery, no separate scavenging system needed.


• Proper sealing which allows the filtration of volatile, toxic and inflammable products.


• Easy removal and cleaning of the Cartridge Assembly.


• Closed System ensures Filtration of toxic, hazardous, explosive materials.


• Central feeding ensures No solid inside the vessel, complete recovery of liquids.


• Cake solids can be maximum dried with N2&Complete cake retains over the plate.


• Uniform filter-aid bed can be formed.


• Reduces the cost of expensive solvents.

Application

• Refineries and Petrochemical Plants, Pulp and Paper Industry.


• Pharmaceutical Industry, Process Industry, Power Industry.


• Chemical Industry, Oil and Gas Industry, Metals and Mining Industry. 


• Water and Waste Management.